Is your router network not enough for your home networking system? Are you searching for the instructions that will help you in adding the range Extender device to your home networking system? Have you brought linksys WiFi range Extender? If yes then you reach the right article by reading this article you will get detailed information. For the we specify how you can install your ring extended device and perform the configuration. You can check out Linksys Wifi Extender Setup step in the next given segment. Don't skip even a single step as it might lead to trouble. So go with the instructions as mentioned. 

Installation Of The Device

The procedure of setup begins with the installation of the range extended device. You can easily install the range Extender by removing its packing. After that, start searching for the location to put the extender. During the initial setup stage you have to put the extender closer to your host device with which you are going to connect it. Then connect the device with the power and turn it on. Wait for the range Extender to start properly and then initiate the setup. 

Configuration Of The Device

Configuring the range extender device is not a hard task if you are aware of the web based setup process. The procedure involves following steps: 

• To begin the process you need a client device such as a smartphone, laptop or computer.

• Connect your client device with the range Extender network using the default credential specified on its label. 

• Instead of wireless connection you can also choose wired base connection using an ethernet cable if your client device supports it. 

• Afterwards, you have to launch the web browser and specify the address in the URL bar. The address you need to use is extender.linksys.com or you can use IP address 192.168.1.1. 

• When the setup page appears you have to mention the username and password which is admin and password 

• Click on the login option and you will reach the user dashboard. 

• Follow the on screen guide and complete the Linksys Wifi Extender Setup. Meanwhile you have to choose the network name of your router device. 

• Specify the password of the network on the screen when prompted.

• Don't forget to change the default login credentials and wireless network details. 

• Also you have to confirm that the device is working on the latest version of firmware or not. If the update is available then do the needful.

• Afterward you have to submit the changes by clicking on the submit button.

Repositioning Of The Device 

After completing the configuration of the device you have to reposition it. For repositioning the device you have to be very careful and keep certain things in mind. The things you have to focus on our as mentioned:

• Find a location closer to the area where you are facing trouble.

• Keep the device within the range of your host networking device. 

• Do not place it next to the device that has radio frequency. 

• Avoid keeping the device in corners or closed to heavy metal objects. 

• Not to put the device next to the thick wall as it may restrict the signals. 

 Once the placement of the device is done you have to test the network. Network testing is important to check whether the position for the device is appropriate or you need to relocate it. For the testing you can use your smartphone device, connect it with the network and browse to test speed. 

Conclusion 

Linksys Wifi Extender Setup instructions given a bug are very simple and quick to follow. Using the above specified instructions anyone can configure the linksys WiFi range extender device. The addition of range Extender will not only boost the coverage but also provide you with a better network experience. You will no longer face network troubles such as no network zone or dead zone area. The Range Extender device will take signals from your router and boost them across your space. You can enjoy high speed internet all over your space. Even after configuring the device if you may face any difficulty then you need to connect technical expert for help.