Desire to have a network that never fails but don’t want to replace your existing router device? If so then you need to set up a mesh network system at your home. Linksys velop mesh is one of the best mesh network systems that you can configure at your home very easily. You can do the Linksys Velop Setup With Existing Router also. To get network coverage in every corner you don’t need to replace your existing networking device. If you are new to networking and looking for the instructions to initiate the setup then you reach the right platform. Further you will find step by step guides that help you to complete the configuration without any issue. You can do the configuration by using your smartphone. Check further how?

Install Primary Node

You have to install the primary node first to initiate the Linksys Velop Setup With Existing Router. Search for a location to put your primary node which must be closer to your existing router device. Make sure the distance between both the devices is only that much as long as ethernet cable you have to connect the primary node and router. After placement of the device and connecting the node to the router you need to start the device. Turn on the power supply of the device by connecting it to a power outlet using the power adapter.

Download Linksys App & Create Account 

Moving further in the process you need to choose a smartphone device in which you can install linksys apps. The app is available on both Google Play Store and App Store for the Android and IOS users. You can install the app from the store as per your device and then initiate the process by creating an account. To create a Linksys account you need to launch the app once it's installed on your device and then choose the create account option. Provide all the necessary details on the screen and click on create account option. 

Configure Primary Node

As you get the access to the linksys app you can proceed ahead for Linksys Velop Setup With Existing Router. Connect your device in which you have installed linksys app to the primary node default network. Rush to the app again and then let the application detect the node. Follow the on screen guide and start configuring the settings. Connect the node with the primary router internet service. After that create a network name for your velop network system and password also. 

Add Additional Nodes

Then go to the add additional node option and start adding additional nodes to the system. You need to add the node one after the other. Place the note in the same room as in the primary node and then turn it on by connecting it with power. Let the note get connected to the primary note itself. Or the app will help you to connect them by pressing the sync button. Once the second node is connected you can connect the third node with the same process.

Finalize Setup And Test Network

Once the configuration is done you have to finalize the setup by submitting the changes you have done. Don't forget to update the firmware of the primary note and additional nodes prior to submitting the changes. After that you need to relocate the additional notes in a strategic way so that your whole home gets covered with the internet. After adequate placement of the additional notes you have to test the network. Take a smartphone device and connect it with the new network. Browse or stream while moving around your home or area to check the coverage and speed. 

Conclusion

Linksys Velop Setup With Existing Router is very simple and easy if you are aware of the process specified in this article. Above given step by step information will help you to add the velop system without removing your existing router device. You can easily proceed with the configuration using your smartphone device. If still you have any difficulty in completing the setup process then you can communicate with technical experts for help. You can find reliable technical help very easily.